[For a plant of rating 100 kWp, enter 100.]
[The useful life of a Solar PV plant is usually ~25 years. Type 25 for 25 years, 20 for 20 years and so on.]
[Select this value by clicking at the location in the google map above. Alternatively, you can enter the values manually.]
[This is automatically determined from the Latitude and Longitude.]
[This is automatically populated based on the selected country.]
[The tilt angle should roughly be equal to the latitude with the maximum value of 25 degree. For e.g.; for latitude of 6.5, input tilt angle = 7 and for latitude of 30 degree, input tilt angle = 25.]
[This value should be >=1 and <1.5.]
[This value should be >"Min DC/AC Ratio" and <=1.5.]
[Select the module from the dropdown.]
[Select the inverter from the dropdown.]
[For e.g.; input 2 for 2%. Actual shading loss is determined based on 3D modeling of the site.]
[This value is usually in the range of 0-5%. It would be higher in desert regions and is dependent on rain fall in the area and cleaning frequency of the modules. Input 2 for 2%.]
[This value is usually in the range of 0-2%. Input 0 for 0%.]
[This value is usually in the range of 0-1.5%. Input 1.5 for 1.5%.]
[This value is usually in the range of 0-3%. Input 2 for 2%.]
[This value is usually in the range of 0-2%. Input 2 for 2%.]
[This value is usually in the range of 0-1%. Input 1 for 1%.]
[Select the value from the dropdown. 90 means 90%, 75 means 75% and so on..]